Tools and materials:
In this video I make a wooden bowl out of a piece of pine I had in the shop. Despite the fact that it was pine, it was pretty hard to carve.
First of all I used a compass to establish the main diameter of my bowl. Then I drilled my depth hole in the centre.
Using a big gouge I started hollowing the bowl. Once in a while I added lines to carve the bowl in segments. This way I had a little better control over the shape I was going for.
I used a round scraper to clean the tool marks although later on I decided to add more character in the interior with a gouge.
I used my chain saw to remove as much material as I could from the exterior of the bowl.
Next I used an electric planer to shape the exterior as much as possible.
To clean the lip of the bowl I used a spoke shave.
I finished shaping with a rasp, a file and my random orbit sander.
I decided to add some character in the interior by leaving the gouge marks.
Finally I finished the bowl with mineral oil.
My bowl came out really unique. But that was it, see you soon with a new project video.
Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.
0 komentar:
Posting Komentar