Jumat, 06 Mei 2022

Making a second wooden chair for kids - DIY

 



















Tools and materials:

Table saw

Block plane

Cordless Impact Driver

Cordless drill

Random orbit sander

Chisel set

Jointer planer

Flush trim saw

Bandsaw

Belt sander

Tormek T8 Sharpening System

Chisel set

Dowel center pin

Trim router

Flush trim saw

Drill press

Air compressor, nail and staple gun kit


A few years ago I made a kids chair. Now I had to make a second one out of spruce. I also made a few fine tunings to the first one. 


I first made a paper template using the first chair as reference. 


I then planed and cut my wood to size. I used the table saw and the bandsaw. I then sanded the pieces to my lines. I also used a chisel to clean the pieces I couldn’t reach with the sander. 


I used dowel joinery to join the pieces together. 


While glueing the sides I wanted to make some fine tunings to the first one. I removed the screws, and removed wood with the router and chisel. I then glued new wood in place which I then sanded and planed flush. I then  painted and varnished the chair. 


Back to the new chair. I glued the sides in place. To glue the back I first planed it with the block plane until I achieved a good fit. 


Next I glued the base. Finally latex paint and water based varnish again.


And my chair was ready. It’s quite lighter coloured because it’s spruce. The old one was pine and it was really old wood.


But that was it see you soon with a new project video. 



Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.

Related Posts:

  • Πώς να συνδέσω ξύλα με καβίλιες Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. Tools and materials I propose:Cordless drillDowel centering jigDowel center pin6mm dowels8mm dowelsΣε αυτό το video, δείχνω μια απλή και φθ… Read More
  • How to make a DIY planter box Tools and materials:Cordless Impact DriverCordless drillRandom orbit sanderBlock planeTable sawIn this video I make a rolling planter box. This type of planter is ideal for balcony gardens. I begun by cutting my st… Read More
  • Πώς δουλεύουμε το ίσιο σκαρπέλο του μαραγκού Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. Tools and materials I propose:Chisel setSharpening kitΣε αυτό το video δείχνω πώς χρησιμοποιούμε το απλό σκαρπέλο στις ξυλουργικές μας εργα… Read More
  • Πώς κόβουμε κύκλους από ξύλο με το ρούτερ Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. Tools and materials I propose:Trim routerRouter bitsCordless drillCordless Impact DriverΣε αυτό το video δείχνω μια απλή τεχνική με την οπό… Read More
  • Πως χρησιμοποιούμε τις ξυλόβιδες Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. Tools and materials I propose:Cordless drillCountersink bitsΣε αυτό το video δείχνουμε πώς χρησιμοποιούμε τις ξυλόβιδες.Disclosure: Some of… Read More

0 komentar:

Posting Komentar