Tools and materials:
In this video I make a rolling planter box. This type of planter is ideal for balcony gardens.
I begun by cutting my stock to size with a circular saw. I used mostly reclaimed material for the hole project.
I then sanded the pieces a little bit and then broke the edges with a block plane.
Next I used the table saw to cut a few braces which I screwed in place.
I then screwed the sides and the bottom pieces. For the bottom I used a scrap piece as spacer.
After sanding I applied a few coats of walnut water based varnish.
Finally I screwed the wheels in place.
This planter box is ideal for balcony gardens, because you can easily clean by moving the hole box at once.
But that was it. See you soon with a new project video.
Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.
0 komentar:
Posting Komentar