Jumat, 31 Desember 2021

How to make a simple first aid cabinet out of solid wood

 
























Tools and materials:

Table saw

Block plane

Cordless Impact Driver

Cordless drill

Random orbit sander

Air compressor, nail and staple gun kit

Chisel set

Jointer planer

Flush trim saw



In this video I make a wooden first aid cabinet out of spruce wood. For this project I used mostly reclaimed materials I found in the garbage.


I begun by making the main body of the cabinet. I cut my timber to size and then made half lap joints to connect the sides. I used glue and nails to keep the pieces together. 


For the back I used scrap pieces of MDF from an old bookcase. 


I made the French cleat system at 45 degrees to hang the cabinet on the wall. 


Once the body was ready I started working on the door of the cabinet. I planed and joined the pieces. Then I selected the grain pattern I wanted and glued the pieces together. This was reclaimed material so it had a lot of character. 


I then glued two braces on the door to keep the panel from warping. 


I made the cross for the front and added the hinges.


Finally I finished my cabinet with two coats of water based satin varnish. I lightly sanded between coats.


And that was it. My cabinet was ready. See you soon with a new project video. 



Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.

Related Posts:

  • Πώς δουλεύω το μικρό ροκάνι Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. Tools and materials I propose:Block planeSharpening kitleather stropΣε αυτό το video, δείχνουμε πώς δουλεύουμε το μικρό ροκάνι, ένα χρήσιμο… Read More
  • Πώς κόβουμε κύκλους από ξύλο με το ρούτερ Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. Tools and materials I propose:Trim routerRouter bitsCordless drillCordless Impact DriverΣε αυτό το video δείχνω μια απλή τεχνική με την οπό… Read More
  • Making a DIY tool box Tools and materials:Cordless Impact DriverCordless drillRandom orbit sanderBlock planeTable sawBandsawBelt sanderHole sawDrill pressAir compressor, nail and staple gun kitBlock planeLatheWood turning tools setWire Burni… Read More
  • Πώς δουλεύουμε το ίσιο σκαρπέλο του μαραγκού Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. Tools and materials I propose:Chisel setSharpening kitΣε αυτό το video δείχνω πώς χρησιμοποιούμε το απλό σκαρπέλο στις ξυλουργικές μας εργα… Read More
  • Πώς δουλεύω το παστράγγουλο Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. Tools and materials I propose:Spoke shaveTormek T8 Sharpening SystemSharpening kitleather stropΣε αυτό το video δείχνω πώς δουλεύται το πολ… Read More

0 komentar:

Posting Komentar