Jumat, 24 Desember 2021

Making a beech mallet - Woodturning

 

























Tools and materials I propose:

Lathe

Buffing kit

Wood turning tools set

Chuck kit

Tormek T8 Sharpening System

Tormek Woodturner’s Kit

Wire Burning Kit

Chisel set

Table saw

Jointer planer

Forstner bit set


In this video I make a wooden carpenter's mallet out of beech wood. Beech is cheap but really hard. So it's an ideal wood for that kind of project. 


I begun by preparing my mallet’s head. I cut a piece of wood in half, jointed the two pieces and then glued them together.


I then squared my block. At this point it was easier to drill the hole for the handle. 


Next I mounted the piece between centres on the lathe and turned it. 


This was mostly skew work. To clean the end grain I used a bowl gouge. 


I like to leave a little bit of excess wood so I can later on get rid of the tailstock marks. I removed the excess wood with a sharp chisel and my random orbit sander. 


Next I turned my handle. I first shaped the tenon and then continued on the rest of the piece. I also added some sweat lines with my wire burning tool. 


Finally I glued the handle on the head and buffed my mallet with carnauba wax.


My mallet came out really nice. But that was it, see you soon with a new project video. 

 


Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.

Related Posts:

  • Making a wood carving knife from an old table saw blade Tools and materials I propose:Angle grinderMetal cutting discsBelt sanderChisel setBlock planeSpoke shaveTrim routerForedom Woodcarving KitTormek T8 Sharpening SystemHand Tool Sharpening KitIn this video I make a classi… Read More
  • Making a beech mallet - Woodturning Tools and materials I propose:LatheBuffing kitWood turning tools setChuck kitTormek T8 Sharpening SystemTormek Woodturner’s KitWire Burning KitChisel setTable sawJointer planerForstner bit setIn this video I make a wood… Read More
  • How to make a DIY mini axe from an old saw blade Tools and materials I propose:Stick welderGrinder / belt sanderTormek T8 Sharpening SystemAngle grinderMetal cutting discsLatheWood turning tools setMineral oilWire Burning KitBandsawIn this video I make a small axe out… Read More
  • How to make a DIY marking knife Tools and materials I propose:Belt sanderTable sawTrim routerBlock planeForedom Woodcarving KitTormek  honing compoundBuffing kitTormek T8 Sharpening SystemIn this video I use an old kitchen knife and a piece of ma… Read More
  • How to make a DIY palette painting knife Tools and materials I propose:Silver solderFluxPropane torchCopper pipe cutterTormek honing compoundForedom Woodcarving KitLatheBuffing kitWood turning tools setChuck kitTormek T8 Sharpening SystemTormek Woodturner’s Ki… Read More

0 komentar:

Posting Komentar